Anatol blog

December 14th, 2018

Most screen printers get their start on manual screen printing presses: They’re small, relatively inexpensive and able to meet the production demands of a newly established screen printing business. Eventually, however, many screen printers find themselves bound by the limitations of a manual screen printing press. Here’s how a manual press can hold back your growing […]

December 12th, 2018

Most screen printers are looking for ways to increase production speed while maintaining quality. Printing wet-on-wet allows you to do just that! With wet-on-wet screen printing, you don’t have to add minutes to your production time by flashing in between each color. Wet-on-wet screen printing with an automatic screen printing press can provide some challenges. […]

December 7th, 2018

Problems with your screen printing emulsion can be especially frustrating: You can’t turn out a good print if you have any problems with your screen’s emulsion or exposure. In a previous blog, we covered some common exposure problems and how to troubleshoot them. If you are still struggling to create, expose and reclaim screens, here are […]

November 30th, 2018

How much ink you lay down on your screen prints will depend on your individual print job and your substrate. Too much ink on your substrate can lead to prints that bleed beyond the stencil edge, soak through the substrate or fail to cure completely. Too little ink can make the print too light, affect […]

February 2nd, 2018
shopping-smart-for-used.png

Whether it’s your first screen printing machine or you’re looking to add another press to your setup, it can be tempting to go the used route. Screen printing presses – especially automatic machines – are big investments and every dollar counts for your business. You can save a bundle by opting for a used press over a new model, but there is some risk involved. If you’re set on purchasing pre-owned equipment, you have to do your research to make sure you’re getting a solid machine.

Regional Offices
Anatol Equipment Manufacturing Co.
World Headquarters
919 Sherwood Drive
Lake Bluff, IL 60044, USA
Phone: 847-367-9760
Customer Service: 847-582-1825
Fax: 847-582-1854
Anatol Europe
European Headquarters
Ul Rejonowa 10
17-100 Bielsk Podlaski, Poland
Phone: (+48) 85 731 93 00
Fax: (+48) 85 730 1779
Anatol Latin America
Latin American Office
San Salvador
El Salvador
Phone: 847-454-7612
Fax: 847-582-1854