Anatol Equipment Manufacturing Co.

Anatol blog

July 19th, 2018
Finding-the-Right-Technique-for-Quality-Manual-Screen-Prints.png

Tips for developing your skills whether you’re pushing or pulling your squeegees.

In the end, the debate doesn’t come down to which school of thought is right and which is wrong. Rather, to be a well-rounded manual screen printer, you should know how to properly execute both pull and push strokes and know which jobs are best suited to each stroke when printing on a manual screen printing machine.

Pulling Your Squeegee: Maximum Control

Pulling gives you a great deal of control over your squeegee on a manual screen printing machine. Depending on the angle of your squeegee, you can apply more ink or less ink. You can make sure your ink is reaching into the corners or fine details of your screen prints. That means pulling your screen prints is best for prints with fine details, clothing labels, prints that require more or less ink than a typical print and prints that cover hard-to-print areas like seams or collars.

To pull a typical print, most printers recommend holding the squeegee at a 45-degree angle, though some printers prefer an angle as high as 70 or 80 degrees. A good practice is to keep the squeegee in line with your nose to maintain a good, consistent angle. For thicker ink application, decrease your squeegee angle, or increase your squeegee angle to apply less ink. Pull the squeegee down the screen toward you with gentle pressure — enough to force the ink through the screen but not enough to bow the edge of your squeegee. 

Finally, watch your form! It’s natural to want to lean your body back as you pull your squeegee down your screens. Resist that urge and keep your body weight upright over your screen as you go. This will help you to maintain consistent squeegee pressure.

Pushing Can Be Easier on Your Body

The big benefit to pushing is that this method is easier on your body. Pulling on a manual screen printing machine puts a lot of pressure on your wrists and fingers. Pulling prints day in and day out can cause chronic pain.

Pushing a squeegee allows you to use your shoulder and upper body strength, making the method easier on your joints. That makes pushing ideal for projects that call for a high volume of prints or when printing a large surface area on your manual screen printing machine. The drawback, however, is that the squeegee can only be held at one angle, making it difficult to work ink into small corners or details, or to adjust the amount of ink on the print.

With pushing, the squeegee must be held at a 45-degree angle otherwise the ink won’t be forced through the screen. As with pulling, it is important to watch how much force is being applied. Push the squeegee across the screen with consistent squeegee pressure as you go. 

Practice Makes Perfect

Regardless of whether you are pushing or pulling your prints, there are some general guidelines to keep in mind when using your manual screen printing machine.

  • Use proper off-contact distance. Depending on what you are printing, you will want to have 1/8″ to 1/16″ of a space between your screen and your platen.
  • Consider a flood stroke. Before you push or pull each print, consider filling your screen with a flood stroke, a gentle stroke at a 20- to 30-degree squeegee angle that loads the screen with ink for better ink coverage. A flood stroke also will help keep ink from clogging screens, and it is especially important when using water-based inks.
  • Stick to one technique. Regardless of whether you’re pushing or pulling a project, you have to commit to a stroke for the entire project. Never push and pull on the same screen, as this can cause screens to shift and prints to become blurry. Using different techniques on different colors can throw off your registration.

The best solution to the push or pull debate is to learn to use each stroke effectively. Practice pushing and pulling on your manual screen printing machine to see how the different strokes, angles and pressures affect your prints. When you’re well-practiced in both pushing and pulling, you will know how to provide the best quality prints for each of your projects.

Even with solid printing technique, pushing and pulling a squeegee all day can be taxing. When choosing a manual screen printing press, look for a machine that’s built light and ergonomic without sacrificing durability. The Anatol Lightning and Thunder manual presses are designed for years of heavy use with the easiest, smoothest operation possible – saving your body and keeping you at a maximum production. 

Don’t want to push or pull a squeegee at all? We’ve got you covered – go automatic and let the press do the work for you!

Leave a Reply

Your email address will not be published. Required fields are marked *

Anatol TV
Anatol Aries 2 Maintenance Reminders
Anatol Volt Umbrella Printing System
Anatol Prodigy Tag Printer
Vulcan II Modular Gas Dryer
Vulcan II Modular Gas Dryer
Vulcan II Modular Gas Dryer
Rapid Wave Quartz Flash with Temperature Sensor
Aries 2 Cycle Mode Set Up
Anatol Volt - Professional grade all-electric automatic screen printing press
Anatol Titan automatic screen printing machine
Anatol Aurora UV LED exposure unit
Anatol VOLT S all-electric automatic screen printing press
Midwest Graphics & Awards - Anatol Testimonial
Anatol VOLT L 14/12 Electric Automatic Screen Printing Machine
Low Country Native - Anatol VOLT Testimonial
Totally T-Shirts & More - Anatol Horizon Testimonial
Charleston Graphics - Anatol VOLT Testimonial
EmbroidMe - Greenville East - Anatol VOLT Testimonial
Awesome Dudes Printing - Anatol VOLT Testimonial
Tee Vision - Anatol Lightning/Titan/Horizon Testimonial
Anatol Prodigy Automatic Tag Screen Printing Press

Regional Offices

Anatol Equipment Manufacturing Co.
World Headquarters
919 Sherwood Drive
Lake Bluff, IL 60044, USA
Phone: 847-367-9760
Customer Service: 847-582-1825
Fax: 847-582-1854
Email: sales@anatol.com
Anatol Europe
European Headquarters
Ul Rejonowa 10
17-100 Bielsk Podlaski, Poland
Phone: (+48) 85 731 93 00
Fax: (+48) 85 730 1779
Email: internationalsales@anatol.com
Anatol Latin America
Latin American Office
San Salvador
El Salvador
Phone: 847-454-7612
Fax: 847-582-1854
Email: internationalsales@anatol.com