Reduzca el Tiempo de Instalación y Disminuya Los Costos de Energía.
Disponible en cuatro modelos, con un tamaño de Area de: 23″ x 33″ ó 26″ x 36″ (para pantallas individuales) o 26″ x 43″ ó 52″ x 36″ (expone dos marcos al mismo tiempo).
La unidad de exposición Aurora UV cura las pantallas de forma rápida, uniforme y eficiente. Expone pantallas en segundos, mientras que le da detalles nítidos y medios tonos de alta resolución, con una exposición uniforme en toda la pantalla. Con una larga duración LED diseñado para durar 50.000 horas, la unidad de exposición Aurora UV LED no requiere ningún tiempo de arranque o enfriamiento, mantiene las temperaturas bajas y es menos costoso de mantener que las unidades de haluro metálico. Deje que la Aurora acorte sus tiempos de instalación y reduzcan sus costos de energía hoy. Esta unidad de exposición está diseñada para una operación de un toque, desde el control de la pantalla táctil de 7,5 pulgadas hasta las cerradura giratoria. Esta unidad de exposición está disponible con un tamaño de pantalla máximo de 26″ x 36″ (para marcos individuales), o 26″x43″ ó 52″x36″ (expone dos marcos al mismo tiempo).
Características estándar
Controles de pantalla táctil
Pantalla táctil de 7.5″ con sistema operativo Aries
Controles sencillos de un solo toque
Expone pantallas en modo automático o modo manual
Ajustes para los tiempos de vacio y de exposición
Programe y guarde hasta 8 configuraciones
Fuente de luz
Larga vida útil de los LEDs: 50.000 horas
Amplio espectro de luz (390-405)
Luces de seguridad para facilitar la alineación adecuada de los positivos
Area de Exposición
Tres opciones de tamaño máximo de pantalla:
23″ x 33″
26″ x 36″
26″ x 43″ (para dos pantallas)
52″ x 36″ (para dos pantallas)
Cubierta y Vacío
El caucho de neopreno crea un sello apretado a la cubierta-a-pantalla para el mejor contacto emulsión-película-vidrio
Cerrojo giratorio en el marco permite una sola mano de operación de apertura y cierre de la cubierta de vacío
Construcción
Vidrio templado opticamente transparente de 1/4″
Sistema de filtración de aire en gabinete de luz para mantener el vidrio y las luces limpias
Gabinete de acero de alta resistencia
Fundas extraíbles para un fácil acceso al interior para la limpieza
Enviados completamente montados y listos para la producción
Incluye Bomba de Vacío (140 L/min)
Soporte incluido
Especificaciones de Aurora Unidad de revelado UV LED
Every effort has been made to ensure the accuracy of the promotional information included in this brochure. Specifications are subject to change. Anatol Equipment Manufacturing Co. and its subsidiaries, if any, expressly disclaim any liability for damages, consequential or incidental, resulting from the purchase, transportation, installation, or use of any products based upon information contained within this brochure. Any rights or remedies are limited solely to those provided in writing by Anatol Equipment Manufacturing Co. at the time of sale.
Por favor, complete todos los campos del formulario. Al enviar este formulario, acepta todos los términos y condiciones de la garantía. En caso de que desee registrar más de una máquina Anatol, deberá registrar un formulario por cada una de ellas.
Preguntas y respuestas
¿Necesitas ayuda? ¿Tiene preguntas? ¿Quieres respuestas? Hemos compilado una lista de preguntas frecuentes que nuestros clientes hacen con más frecuencia. Encontrarás tus respuestas aquí.
We replaced an older manual press from a different brand with the lightning model. Hold registration great and well built. Very happy with the upgrade. Micro Registration and off contact... read more much more user friendly than previous press.
Michael Martin
Quality carousel. Super professional dealings and willingness! 🤘🤘🤘🤜🤛
Michal Valašík
We've bought an automatic coating machine and an ink mixer and everything went smooth. The production and delivery time was really fast, the costumer service and sales were available all... read more the time and answered every question in hours. The quality of the products are good for a reasonable price. Great experience, we totally recommend them.
Mátyás Lovász
We really enjoy our Anatol Volt Press. The ease of use and quality of prints are amazing. Also we don’t have to worry about air compressors and loud noise. So... read more glad we made the switch from manual printing to auto printing. Nelson our sales rep was very helpful and knowledgeable. We went to the open house they had at Rock Hill Screen Printing and got to see the Volt in action before we purchased. Looking forward to buying another one soon. Best investment we have made in our screen printing business. Very happy!!!
Al Kale
We are having so much fun with the new press and the output and quality is amazing. It has really changed our business for the better. Not only is the... read more Anatol press so amazing but the customer service from Nazar at Anatol Europe is so good and we recommend everyone to buy their screen printing products from Anatol🙏🔥🔥❤️
Chris Montgomery
Ken is an absolute professional and highly knowledgeable of the equipment he sells. Will definitely keep going to Ken for guidance for future purchases.
Elevated Screen
Paul was very helpful. I knew upgrading to this equipment would be a game changer, and I’m not disappointed. The Thunder is faster to set up than my old press... read more and don't think I can ever live without a Quartz Flash. Looking forward to more upgrades in the future.
Troy Brown
I purchased an Anatol Thunder 6 color press. When I got the press in and set up it was very clear that this is a quality built press. It is... read more very sturdy and rotates freely. The micro registration works awesome, I had my first job on the press registered in minutes. Equipment Matters and Anatol hit the mark!
Don Chesek
La compra de los equipos Anatol ha sido una completa bendición, desde el primer día la atención por parte de Nelson ha sido extraordinaria, siempre atento y pendiente a todas... read more las preguntas e inquietudes, el servicio técnico y garantías ni hablar, es una respuesta inmediata, 100% recomendados. Si quieres comenzar en la serigrafía Anatol es tu mejor opción.
orester nieto
We have had a great experience with Anatol from the very beginning through post setup/training. Paul really helped us decide on the best equipment for our needs and Gene did... read more an awesome job of installing and training on the press. It was really easy to ask about any issues including electrical needs to our workshop to future add ons to the equipment. Gene has quickly answered any questions we’ve called/texted about, but overall the press software is so intuitive that we were quickly up and running. Don’t know why we waited so long to get a Volt. The only think to think about is if you can afford to, go a bit bigger as you’ll quickly feel like you should expand further! Thanks Anatol for some terrific equipment.
Darin Uesugi
Best Screen Printer company, and customer service don’t waste your money on anything else! Waited a year and was worth every cent.
Alexander Weston
Thank You Paul and everyone at Anatol for building me a press, dryer, and exposure unit. This is my second anatol and could not be happier. You guys... read more gave me the greatest gift, time. Running both presses is amazingly efficient. Thanks for getting me back to the fishing in the mountains. Been almost a year now with my new Volt M 12 station. Amazing how much more you can get done. Quiet and very efficient.
Jeff Posey
I purchased an Anatol Volt about one and a half years ago and have not looked back. One think that is important to me is how a company handles... read more issues. Let us be frank here 5-star review are great. 5-star review with nothing but great words are cool too, but they do not tell me anything. As a consumer I like to know that I am taken care of when there is a problem no matter how big or small. It helps me sleep at night when I know that a company has my back. Mike and Gene have been there every step of the way. I am saying this because not only am I 100% satisfied with my purchase but when an issue comes up, I have had nothing but stellar customer service. These machines are bullet proof. Any small issue I have had has been taken care ASAP with no down time. I have only had one issue with my flash unit. The flash unit thermocouple needed to be replaced to a new mount design that was made in the meantime since I purchased my press and flash. I made a call, and I had a new part next day. This type of customer service is priceless. We are at 250,000 print and counting and we love this machine, and we love this company. I love seeing all the new items they are coming out with. I cannot wait to purchase more equipment from them. If you like working with real people who work just as hard as you and believe in the product, they are selling then I think you should choose Anatol. If you like overpaying for equipment and pushy salespeople, then choose any of the competitors. You will not regret this purchase from Anatol. Thanks, Mike, for being a stellar dude. Thanks, Anatol for making an amazing machine.
Charlie Berlin
Very happy with the purchase of our Volt. Manny, their tech was very helpful in setting our machine up and getting us running. Adrian in Sales was great... read more and still checks in on us from time to time. The quality of our prints is amazing, and the machine is so quiet you can have a normal conversation next to it while it's running. The only issue we had was that we had 2 bulbs break in our flash that I thought should have been covered under warranty but weren't. Is what it is. I would definitely buy another one.
Jason Crawford
We are very happy with our decision about choosing Anatol for our new automatic press. The Volt is a great choice if you're looking for all electric...super quiet and no... read more compressor to deal with! Our sales rep. Nelson Lopez was the absolute best person we've ever dealt with. Super honest and always eager to answer any questions we had....and we had a lot! He was a major factor in why we went with Anatol. Other reps from other press manufactures we had talked to were very pushy and bad mouthed competing companies! Nelson was the exact opposite. Our install guy, Sam was awesome too!! So far, we are loving the Volt!!
Chad Sherman
If you’re looking for any press. Anatol is the way to go. Ken is the BEST sales rep you will come across by far! Our press has been delivered,... read more training came out and Chris was amazing. It only took 3 hours to learn the press and we are rocking orders out. We cant wait until we get our anatol dryer arrives shortly. Thanks again for everything!
Obtenga contenido e inspiración de impresión de pantalla en su bandeja de entrada
To register the warranty on your Anatol machine, log in to your Anatol
account or create a new account. By submitting the warranty registration form, you agree to all Warranty terms and conditions. You must complete a separate registration form for EACH Anatol machine you wish to register.
