Proper Mesh Care: How to Maximize the Life of Your Screen Printing Screens

Your screen printing quality fully depends on the condition of your screens - here's how to keep them in great shape!

March 07, 2018 Proper Mesh Care: How to Maximize the Life of Your Screen Printing Screens

For every screen printing shop, screens are a major expense. Knowing how to clean, care for and store your screens properly can help you to get the maximum amount of life out of your screens, lowering the amount of money your shop spends on screens over time.

Invest in the best screens possible

Getting the most out of your screens begins with investing in quality screens. When you’re trying to keep the cost of your operation as low as possible, it can be tempting to buy budget screens. But with screens, you ultimately get what you pay for. Buy the nicest screens you can afford, ones with sturdy frames and durable mesh.

Take care when reclaiming screens

You can reuse a screen thousands of times, but you have to know how to properly clean and reclaim them. Being too rough with your screens can lower their lifespans, but not cleaning them thoroughly can result in poor emulsion adhesion, pinholes and blurred prints. First and foremost, clean a screen as soon as possible after printing; letting the emulsion and ink sit for too long can make screens difficult to clean, causing you to put more force than necessary on them.

When cleaning a screen, let the chemicals do their jobs. Let the emulsion remover soften the stencil, then spray it out with a pressure washer. Set the pressure washer on the lowest setting possible to avoid warping the screen. Try to avoid scrubbing screens, as this can fray the mesh. If there are any stains on the screen, use a haze remover; those stains can restrict the mesh openings and interfere with printing.

Adjust screen tension slowly

If you print on retensionable screens, know how to adjust the tension the right way. To avoid shocking and tearing the mesh, the tension of the screens should be adjusted slowly, in stages. Increase of the tension of your screens in thirds or fourths of the total desired increase in tension, waiting at least 20 minutes between increasing the tension. Know the tension parameters for your screens, and invest in measurement tools so you can keep precise track of your screens tension.

Handle and store screens properly

Make sure your staff knows how to properly handle screens and that they handle screens with care. Many screen fatalities are due to avoidable accidents! Also make sure you’re storing your screens carefully. They should be stored in a clean, dry place. If you’re using wooden screens, consider storing them in an airtight container, even if it’s just a large garbage bag that’s tightly tied, to keep out moisture that could warp the wooden frame.

Know when to replace screens

Caring for your screens means knowing when to replace screens that have deteriorated to a point where they will interfere with print quality. Screens need to go when they will no longer hold tension, or when the mesh has become frayed with will interfere with ink’s passage through the screen openings. Experienced printers will know how to spot the signs of expired screens. They include a gray hue that can’t be cleaned, saggy screen mesh that can’t be tightened and wobbly or bowed frames.

Screens are a major part of any screen printing shop’s budget. Caring for your screens can help keep your screen expenditures lower by helping you to get the maximum amount of prints out of each screen you purchase.

Looking for more information about choosing and using the right screens in your screen printing shop? Check out these blogs:

Which Screen Printing Frames Are Right for Your Shop?

How to Reclaim Screens for Textile Printing

Keep Your Screen Printing Quality High with Proper Screen Tension

Tags: screen printing screens, screen printing supplies, screen printing techniques

Anatol TV

  • Pentland Graphics - Anatol Titan Testimonial
  • Anatol Volt - Professional grade all-electric automatic screen printing press
  • Anatol Aurora UV LED exposure unit
  • Midwest Graphics & Awards - Anatol Testimonial
  • Low Country Native - Anatol VOLT Testimonial
  • Totally T-Shirts & More - Anatol Horizon Testimonial
  • Charleston Graphics - Anatol VOLT Testimonial
  • EmbroidMe - Greenville East - Anatol VOLT Testimonial
  • Awesome Dudes Printing - Anatol VOLT Testimonial
  • Tee Vision - Anatol Lightning/Titan/Horizon Testimonial

Regional Offices

Anatol Equipment Manufacturing Co.
919 Sherwood Drive
Lake Bluff, IL 60044, USA
Phone: 847-367-9760
Fax: 847-582-1854
Anatol Poland
Ul Rejonowa 10
17-100 Bielsk Podlaski, Poland
Phone: (+48) 85 731 93 00
This email address is being protected from spambots. You need JavaScript enabled to view it.
Central & South America
Anatol Central & South America
919 Sherwood Drive
Lake Bluff, IL 60044, USA
Phone: 847-367-9760
Fax: 847-582-1854
This email address is being protected from spambots. You need JavaScript enabled to view it.
Esp Español Pol Polski Rus Русский Customer Stories Helpdesk Software