{"id":13643,"date":"2018-12-21T21:07:43","date_gmt":"2018-12-21T21:07:43","guid":{"rendered":"https:\/\/anatol.com\/?p=13643"},"modified":"2021-10-21T09:01:45","modified_gmt":"2021-10-21T09:01:45","slug":"how-to-prepare-for-your-automatic-press-installation","status":"publish","type":"post","link":"https:\/\/anatol.com\/ru\/how-to-prepare-for-your-automatic-press-installation\/","title":{"rendered":"How to Prepare for Your Anatol Automatic Press Installation"},"content":{"rendered":"
Buying an automatic screen printing press<\/a> is a big decision. You likely put a lot of work into choosing the right press for your shop. Now that the decision is made, however, the work really begins. You have to prepare your shop so that installation of the press goes smoothly and your press is ready for optimal operation. Here are the steps you need to consider when preparing for the installation of your automatic screen printing press.<\/p>\n Before your press is delivered – before your press is ordered<\/em> – you need to verify that you have the right spot for it in your shop. Generally, automatic screen printing presses take open space that is at least 9-10 feet in diameter, without any barriers like support columns. In addition to space for the press, you also will need space to work around the press. It\u2019s recommended that you should have at least 2 feet of space, or as much as possible, on all sides of the machine so you can maneuver around it easily during press runs and maintenance. If you have additional equipment going in to support or work with your screen printing press, like an air compressor or a conveyor dryer,<\/a> you also will need to be sure that you have adequate space for the additional equipment and that you have a space that is convenient to your shop\u2019s layout.<\/p>\nFind the right space<\/h2>\n