Bimba CARRIAGE CYLINDER 31″ Stroke

Show Filters
Show filter

Bimba CARRIAGE CYLINDER 31″ Stroke

$282.70

  • ID: # 22125
  • Part Number: S904A0000171
  • Location on the machine: Print head
  • Used for: Horizon, Trident

Bimba Carriage Cylinder 31″/Stroke description

This linear-type air cylinder was used by Anatol on our Trident and Horizon automatic screen printing machines.

The cylinder moves the carriage back and forth.

In order to best accommodate different machine sizes and configurations, Anatol uses different cylinder sizes on their air-driven automatic presses. To make sure you choose the one that will fit your press, please note that this cylinder will have part number D-83153-A-31 printed on it. If the part number is too worn out to read, please measure the fully extended rod that comes out of the cylinder. The length should be 31″, not including the threaded part. The cylinder also has one fitting mounting hole in the back of the cylinder and one on the side. Its diameter is 1.6″ (40mm).

Key Features:

  • Diameter: 1.6″ (40mm)
  • Part number: D-83153-A-31
  • 31″ (790mm) stroke

Your message was successfully sent!