stratus_2_jumbo_005.jpg

Stratus II Jumbo Screen Printing Machine

GET A QUOTE
Smooth, consistent production for your biggest printing projects.

The Stratus II is no longer available. Check out its successor - the all-new Anatol Vector!

 

The Stratus Jumbo screen printing machine offers the features and benefits of the Stratus II for large format substrates like towels and flags. The heavy-duty rolled steel body balances out the extra print head length and oversized pallets to ensure smooth production runs even at high speeds. Low profile side-screen holders give easy access for micro-registration and stroke adjustments, and make it easy to load ink. The Stratus Jumbo screen printing press is controlled through a 15” (17” on larger configurations) touchscreen interface. The AC print heads can also be controlled individually from control panels mounted at each station.

The Stratus II is no longer available. Check out its successor - the all-new Anatol Vector!

Touchscreen Controls
  • 15” touchscreen with Aries operating system
  • Real-time display of print count and speed (pcs/hr)
  • Air pressure shut off control
  • Self-diagnostic feature
  • Sample print feature
  • print one shirt automatically
  • Set automatic sequential start/finish function
  • Set dwell times
  • with adjustments for cycling speed and cool down time
Print Heads
  • Individual print head control print/flood speed
  • squeegee pressure
  • Test print at station
  • Multiple print strokes (1-9) per head
  • Air screen clamps
  • Squeegee/flood bars snap in/out with the flip of a lever
Tool-less Adjustment
  • True three-point micro-registration system provides exact control of screen position (front-to-back
  • left-to-right
  • and rotational movement)
  • Gauged front/rear stroke adjustment easily slides into lock/unlock positions
  • Gauged squeegee/flood bar angle adjustment allow single-handed locking from 0º-30º at increments of 5º
  • Gauged click-type central off-contact precisely adjusts all screen printing pallets simultaneously at range of 0-3/8 inch
  • at increments of .005”/click
Pallets
  • 41” x 54” aluminum rubber-coated pallets included
  • Squeegee/flood bars snap in/out with the flip of a lever
  • Pallet locking system
  • load and lock with one lever (for front or side loading pallets)
  • Front loading screens for simple screen slide out
Servo-Indexer
  • Free wheel mode
  • Clockwise
  • counter-clockwise
  • and half indexing
  • Table lift and lower
  • Provides higher production speeds with more precise control of acceleration and deceleration
  • Servo rated to last for decades
  • Programmed with Step-Back
  • Multi Step-Back and Cycle mode indexing
Construction
  • Equipped with Anatol’s safety bars to ensure operator safety
  • Heavy-duty steel frame to support high speeds and smooth production cycles
  • Large column with thrust ball bearing provide stability
  • Ball bearing lead screw with a recirculation internal lubrication system
  • Maintenance-free
  • requires only periodic oil level check
    • 17” Touchscreen
    • Configurations of 14/12 and larger come with a 17” touchscreen standard, but the larger screens can be added to any model to give you a bigger viewing area.
    • Individual head off-contact
    • Set off-contact on each head separately.
    • Screen-width Extenders
    • Fit extra-wide screens into the print heads.
    • Pallet Locator
    • Available with slide-style pallets only.
    • Front and rear screen clamps
    • Provide additional support for larger screens.
    • Foot pedal for manual cycle mode
    • Foot pedal allows indexing of the press.
    • Flash Cure
    • Infrared flash cure

 

    Rapid Wave quartz flash cure
  • Stratus Jumbo 6 stations/4 colors
  • Stratus Jumbo 6 stations/5 colors
  • Stratus Jumbo 8 stations/6 colors
  • Stratus Jumbo 10 stations/8 colors
  • Stratus Jumbo 12 stations/10 colors
  • Stratus Jumbo 14 stations/12 colors
  • Stratus Jumbo 16 stations/14 colors

Equipment Certification

European Committee for Standardization® (CE) and Underwriters Laboratories® (UL) compliant: built to specifications established by both CE and UL

Premium service that will exceed your expectations.

Customer Service and Support are a way of life at Anatol Equipment. We strive to improve our service to keep your equipment running like the day you had it installed. This is our commitment to our customers.

Regional Offices

Anatol Equipment Manufacturing Co.
World Headquarters
919 Sherwood Drive
Lake Bluff, IL 60044, USA
Phone: 847-367-9760
Fax: 847-582-1854
Email: sales@anatol.com
Anatol Europe
European Headquarters
Ul Rejonowa 10
17-100 Bielsk Podlaski, Poland
Phone: (+48) 85 731 93 00
Fax: (+48) 85 730 1779
Email: internationalsales@anatol.com
Anatol Latin America
Latin American Office
San Salvador
El Salvador
Phone: 847-454-7612
Fax: 847-582-1854
Email: internationalsales@anatol.com