Anatol blog

Może 17th, 2018

A flash cure unit allows screen printers to optimize their screen prints. With a flash cure unit, you can overlap your colors without unintended blending or put down an underbase for a more opaque print. Getting those optimal results takes some skill with your flash cure unit, and if you don’t know the ins and outs of using a […]

luty 13th, 2018
How-to-Prevent-scorching-to-keep.png

Screen printing requires heat. Every screen printer knows that applying the right amount of heat for the right amount of time results in a crisp screen print that’s fully bonded to your substrate. Sometimes, however, heat can prove the enemy. 

lipiec 27th, 2017
How-to-Choose-a-Flash-Cure.png

Flash cure units are a mainstay in nearly every screen printing shop. They’re crucial when it comes to printing a white underbase or when printing abutting or overlapping colors.

lipiec 18th, 2017
Safety-Tips-for-Operating-Your-Screen-Printing-Flash-Cure.png

In screen printing, safety comes first. The well-being of your press operators and other employees is often contingent upon their knowledge of and familiarity with the equipment they’re using.

lipiec 13th, 2017
A-General-Guide-to-Quartz-Flash-Cure-Settings-for-Screen-Printing.png

By Michael Jirasek

I remember the first time I worked with a quartz flash. It was a little scary! Flash settings can be tricky and require attention to detail. However, the payoff in increased production more than makes up for the learning curve. Here’s a general guide to help you find the right quartz flash settings for your print jobs.

Marsz 1st, 2017
wetonwet.jpg

Have you noticed an overreliance on your flash cure is slowing down your production? A flash cure can be a helpful tool or it can be a waste of time; you have to know when it’s necessary and when it isn’t.

luty 22nd, 2017
Your-Flash-Cure.png

When it comes to your screen printing production, a flash cure can either be your best friend or your worst enemy – it can be a big help or it can slow you down. Understanding the different types of flash units and their appropriate uses will help you get the most out of them.

Biura Regionalne
Anatol Equipment Manufacturing Co.
Siedziba główna
919 Sherwood Drive
Lake Bluff, IL 60044, USA
Telefon: 847-367-9760
Fax: 847-582-1854
Anatol Poland
Siedziba w Europie
Ul Rejonowa 10
17-100 Bielsk Podlaski, Poland
Telefon: (+48) 85 731 93 00
Fax: (+48) 85 730 1779
Anatol Latin America
Siedziba w Ameryce Łacińskiej
919 Sherwood Drive
Lake Bluff, IL 60044, USA
Telefon: 847-367-9760
Fax: 847-582-1854