Anatol blog

Problemas comunes de exposición en la serigrafía y cómo solucionarlos

Los problemas de exposición pueden crear muchos dolores de cabeza en su taller, pero afortunadamente hay algunos pasos sencillos que puede seguir para prevenirlos. ¿Tus marcos te están dando problemas? Sabes lo importante que es una gran plantilla para crear una gran impresión. Por esa razón, los problemas de exposición pueden causar algunas de las […]

Leer más
How to Use Post-Exposure to Create Durable Screen Printing Stencils
How to Use Post-Exposure to Create Durable Screen Printing Stencils

Every screen printer wants to create durable stencils that don’t degrade over the course of a print run. Stencils that soften or break down during long press runs or when used with water-based inks can slow production and lead to misprints and waste. To combat this, many screen printers turn to post-exposure. That is, exposing […]

Leer más
Essential Screen Printing Pre-Press Prep Habits Successful Printers Use
Essential Screen Printing Pre-Press Prep Habits Successful Printers Use

So much of your focus as a screen printer goes into perfect printing operations: Using the right off-contact, squeegee angle and pressure, and curing at the right temperature for the right amount of time. But when it comes to setting yourself up for the perfect press run, much of your success hinges on your screen printing pre-press operations.

Leer más
Preparing Your Screen Printing Screens for Sharp Stencils
Preparing Your Screen Printing Screens for Sharp Stencils

The best screen printing results always begin with well-executed pre-press. It’s easy to think of your screen printing press as the backbone of your operation. But remember, a press can only deliver quality prints if it’s printing through quality screens. Your screens deserve as much attention as any other part of your setup, because no […]

Leer más
See the Light
See the Light: The Benefits of UV LED Screen Printing Exposure Units

Find out how UV LED exposure units can speed up your production and increase your efficiency! The popularity of UV LED exposure units has increased rapidly since they were introduced to the screen printing market only a few years ago. If you haven’t upgraded to a UV LED exposure unit in your screen printing shop, […]

Leer más
How to Optimize Your Exposure Time
How to Optimize Your Exposure Time to Create Durable Screen Printing Stencils

There are a lot of variables that go into exposing a screen for screen printing. The opacity of your film positive, your emulsion, the type of exposure unit you’re using and even the age of your exposure unit all will affect the amount of time you need to expose your screens and the success of your stencil.

Leer más
Get Crisp Screen Printing Stencils
Get Crisp Screen Printing Stencils with the Right Exposure Unit

Running a screen printing business means making big purchasing decisions. In addition to choosing a press, a dryer and perhaps a flash cure unit, you’ll need to choose a screen exposure unit.

Leer más
revelar screens serigráficos
Cómo revelar screens serigráficos como un profesional

With so much attention on applying ink to shirts, it’s easy to forget that pre-press is just as important! If your screen hasn’t been properly prepared before it goes on the press, even perfect printing technique won’t deliver a quality print. There are so many variables that factor into exposing your screens it can be difficult to get a good result, especially if you’re unfamiliar with the process.

Leer más

Your message was successfully sent!